600SS+HG Electric (Amaze-Heater) has great ratings
- to make sure this fits. P.when(“ReplacementPartsBulletLoader”).execute(function(module) module.initializeDPX(); )
- Heat guard can be custom decorated with any paint, sport team logo stickers, stencil art, etc
- 600 Watts (2047 BTU), 120 volts, 5.0 Amps uses only 0.6 KW/HR of energy – ideal for 300 sft room
- This fits your .
- Heat guard reduces surface temperature to about 120F, making it the safest heater of its kind
- Heat guard feature doubles the efficiency of heat distribution due to dual convection
- All advantages of the base model plus
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
This wall mounted panel type heater works on the principle of natural convection. The heater uses non-conducting materials and is hot to touch but doesn’t burn and is triple insulated for electrical protection. It gives light heat to the room over a longer time period and may be used in conjunction with a individually bought plug-in type thermostat.
Berko Commercial Fan-Forced Wall Heater, 3000W, 277V vs 600-SS+HG
Berko Commercial Fan-Forced Wall Heater FRA3027F, 3000W, 277V Features: Amps: 10. 8Approval: cETLusBTU: 10236CFM: 100Color: Northern WhiteConstruction: SteelDepth Inches: 3-3/4Height Inches: 18-1/4KiloWatts: 3 / 1. 5Phase: 1Voltage: 277Watts: 3000Width Inches: 14-5/16Grille Depth Inches: 1-1/4Grille Height Inches: 19-5/16Grille Width Inches: 15-3/4Thermostat: Integral Double Pole.
US Stove 5040 Pellet Stove, Small
US Stove’s 5040 Small Pellet Stove is made of heavy steel construction and intended for moderately sized homes and condos. This easy-to-use stove has a digital control board that lets you to change the heat and draft with simple buttons and 4 heat settings. Sleek lines and refined features make this a great stove for any home. Accepted for mobile and modular homes with optional new air kit, however not available for sale in Washington and California. Installation materials aren’t included (i. E. Floor protector, chimney connector, thimble, radiation shield, flue, etc. ).
Broan 124 Wall Heater, 750/1500 Watt 120 VAC, White Grille
Powerful register heaters are intended to be wall mounted with a register-look, neutral white grill to make them as inconspicuous as they’re economical. Factory wired at 1500W, at 120V AC, it may be easily transformed to 750W at 120v or 1,500W at 240V AC for extra versatility. White grill has down flow louvers to direct heat softly toward the floor and a one-part design with baked enamel finish for durability. Use a line-voltage wall thermostat (Model 86W sold individually) or timer (Models 59V or 59W 60-minute timer or Models 61V or 61W 15-minute timer) for a simple and convenient way to control the heater. Fast warm up time caused by an economical heating element that gives encouraging heat in seconds. Corrosion-tolerant, Nickel-Chrome alloy heating element; manual reset, thermal overload protector; permanently lubricated motor and high efficiency blower wheel add to deliver economical operation and lasting performance for many years of trouble-free heating. Mounts straight to wall studs; housing mask included to prevent construction damage to roughed-in heater. Optional 4-Pack of Rough-in, Housing Only (Model 171H) available for big projects. Wall heaters are meant to offer additional heat from a wall place and not to take the place of a home’s major heat source.
W33 Stainless Steel Flush Mount Frame For 33" Units vs 600SS+HG
For a clean look that creates minimal visual affect, the 304 stainless steel flush mount kit is a perfect choice for any 33″ Infratech heater. Flush mount kits may also be powder coated in black, white, bronze, beige, and almond for an extra cost. All flush mount kits include hi-temp fixture whip and hi-temp wire nuts. Features: Type: Flush Mount Frame. Finish: Stainless Steel. For use with 33″ Units.
Dimplex DFI400LH Opti-Myst Cassette-Style Indoor Space Heater with Faux Logs, Black
Revolutionary ultrasonic technology can be used to create the flame and smoke effect of the Dimplex Opti-myst. As the mist rises up through the logs, the light reflects against the water molecules creating a substantial illusion of flames and smoke. The result is an look so authentic it’ll be mistaken for a true wood-burning fire.
King WHFC1215 1500-Watt 120-Volt Ceiling Mount Heater, Bright White
King WHFC1215 1500-Watt 120-Volt roof Mount HeaterThe King WHFC1215 1500-Watt 120-Volt roof Mount Heater is a stylish heater that gives powerful heating in a nicely crafted design that blends with any decor. This powerful heating unit is a great choice for small to medium sized rooms that need additional heating. This unit heats up quickly and can supply and economical heating thanks to the powerful 1,500 watts that this unit offers. If you want an cheap, compact and stylish heater; check out the King WHFC1215 1500-Watt 120-Volt roof Mount Heater. Heats up to 200 Sq. Ft If you need additional heating in bedrooms, offices, bathrooms or another individual rooms in your home then you’re sure to love this small and compact still powerful wall heater. This unit can supply powerful heating to any room up to 200 square feet with ease. The heat element is contsructed of Nickel Chronium alloy and has corrosion resistent wire strung through a minimum of four rows of mica insulator. It also has a factory provided ocnnection that lets for field modification of 50% wattage upon installation. Special Features of the King WHFC1215 1500-Watt 120-Volt roof Mount Heater1,500 Watts of Power Heats up to 200 Square Feet lasting Construction Easy to Install nice Finish SMART bound Thermal Overload ProtectionC-Frame MotorSquirrel Cage Blower is QuietStylish fitted Design The King WHFC1215 1500-Watt 120-Volt roof Mount Heater features an nice painted finish and fitted design. The fitted design saves space and mimics the look of a regular heating vent. Not only does this convenient all in one design supply powerful heating, it’s also fast and easy to install too. The wall can is made from 22 gauge electrogalvanized steel and holds knockouts although wich power leads are brought for easy installation. This heater features factory installed groundwireDurable Construction The King WHFC1215 1500-Watt 120-Volt roof Mount Heater was p.
Floor HEAT Kit Mat 120vac 1ft x 30ft
A complete floor warming kit, contents include a Floor HEAT Mat, Floor Warming Thermostat, and WIRE EYE. Kits are available in the (5) most well-liked mat sizes. Equipped with self-sticky backing, Floor HEAT Mat is easy to install and comes with a low profile wire so it’s virtually undetectable under tile and stone floors. The Floor HEAT Mat is intended for best performance when used in conjunction with 254 Platinum, 86 LATILEVEL� and SpectraLOCK� PRO Grout.
5"x12" Brazed 40 Plate Heat Exchanger Outdoor Wood Furnace 1-1/4" MPT
This unit is a 40 Plate Stainless Steel Heat Exchanger. One common application for these plate exchangers is for use in conjunction with outdoor wood stoves when transferring heat to the present indoor pressurized boiler system generally keeping the two fluids separate with best heat move. We give realistic heat move outputs using realistic flow rates. Any brazed plate heat exchanger can have higher or lower performance data depending on temperatures, flow rates, and other variables. 146,000 BTU/hr 10 GPMProduct Data:Material: 316L Stainless Steel plates with 99. 9 copper brazingType: Liquid to LiquidConnections: 1-1/4″ MPT PortsSize: 5″ x 12″ x (# of plates)Design Pressure: 435 psiTest Pressure: 652 psiDesign Temperature: -256F – 437FApprovals: UL ListedAdvantages in comparison to competition:large port spacing to let for easier installation (2-3/4″ C-C)Four Mounting Studs on front cover for easy installation1″ MPT connections standard on all units, 1-1/4″ MPT connections available on units 40 plates & largerRated for use in high temperature (437F) and pressure applications (435 psi)The brazed plate heat exchanger has a simple operating principle. Depending on the plate and nozzle orientation, each liquid passes through alternative channels inside the heat exchanger. An very high heat move coefficient is attained caused by the flow characteristics in each channel. A specially intended and tested CHEVRON pattern causes a turbulent flow of the liquid ensuing in higher heat move and reduction of the amount of deposits inside the unit. The plates in this exchanger are configured 180 degrees to each other, causing plate ridges to intersect and creates a lattice of intersecting channels. The fluids may be plumbed in counter or co-current way. The heat exchanger carries a restricted LIFETIME WARRANTY.
TPI Element Replacement Kit For MR & CH Series Infrared Heaters 4300W 208V
TPI Element substitute Kit 64337-027 For MR & CH Series Infrared Heaters 4300W 208V Features: Amps: 20. 67Approval: cETLusColor: Dull Orange GlowConstruction: Nickel-Chrome Alloy Element / ceramic End CapsHeight Inches: 4-1/2KiloWatts: 4. 3Length Inches: 20Phase: 1 or 3Voltage: 208Watts: 4300Width Inches: 12.
5 Loop PEXworx Stainless Steel Radiant Heat Manifold for 1/2" Pex / Pex-Al-Pex
This 5 loop Pex radiant heat manifold is the most complete manifold available for hooking up your radiant heating system. This kit will include:(1) Supply 1″ Stainless Steel Trunk w/ separation valves(1) Return 1″ Stainless Steel Trunk w/ flow meters(1) Set of Mounting Brackets(2) Thermometers (one on the supply manifold and one on the return manifold)(1) auto air vent to help in air elimination(10) 1/2″ Pex tubing compression connectorsEach manifold has a 1″ FNPT ball valve connection with a y-strainer to catch debris. .
ALEKO® Electric Tile Radiant Warm Floor Heat Heated Kit 1000W 80SQFT
ELECTRIC FLOOR WARMING SYSTEM used to heat tile flooring. The system is intended to heat the chosen square footage when installed in mortar under tile or masonry flooring. The heating element is spaced 6-7″ separately across the heated area. This lets for simple coverage of any shaped area. The heating element is less than 1/8″ thick, so the rise in flooring height is negligible. This system is BRAND NEW and made by GudCraft brand. We offer a 1-year warranty on its product. Product Life is 50 years.
Cadet CST302 Wall Heater, 3000W 240/208V Com-Pak Twin Heater Assembly Only
The Cadet CST302 is an electric wall heater from the ComPak Twin series, which features a two heater design for efficient heating in big spaces. It is intended for use in 240V or 208V installations. This Cadet heater creates electric powered heat with wattage of 3000W at 240V and 2250W at 208V. This Cadet ComPak heater should be installed with a horizontal alignment, preferably on an inside wall. It requires a thermostat for use and is most efficient when paired with a Cadet builtin thermostat kit. This Cadet wall heater doesn’t come with a wall can or grill, both of which are obliged and sold individually. Cadet wall heaters are lasting supply years of dependable heating for your home, although it is suggested that they’re cleaned at least every six months.
- VonHaus 450W Wall Mounted Electric Flat Panel Heater Paintable Slimline Low Energy Eco Ceramic Space Heater (23.5 x 23.5 x 0.4 inches)
- Econo-Heat 0603 E-Heater, White
- Amaze Heaters Wall Mounted Electric Heater, Heat Reflector, 400 Watt
- Amaze-Heater Wall Mounted Room Space Heater, 600 Watt, 120 Volts
- Stiebel Eltron CK 15E 120-Volt 1500-Watts Wall Mounted Electric Fan Heater
- Econo-Heat Wall Panel Convection Heater – 1365 BTU, Model# 603