Quick facts about W10331686 Spark (Whirlpool)
- Genuine Replacement Part
- General Electric item
- Whirlpool item
- Manufacturer model # W10331686
Warranty: standard manufacturer’s warranty
S&H: Free shipping if ordered online
Dimensions and weight: check our reviews
Official Whirlpool W10331686 Site
This is a rebuilt electronic module for my kitchen range. It was priced about a 3rd of the new part and performs flawlessly. Unfortunately, if it does fail I have a substitute for it – the original. It turns out this wasn’t the part responsible. D’OH. Delivery was timely and I don t have issues with the buy.
The remanufactured part made my range work like new again. Installation was pretty straightforward with only some screws to take off, then some clips. Make sure to mark the order of the clips to reinstall the new one properly. I do like that the seller will include a label to return the old board for recycling/remanufacture and it does not just go in the trash.
Price was half of that being asked by other appliance part distributors on the internet. It solved the problem of the spark igniter not lighting both the stove top and oven burners, that malfunctioned at the same time, without warning. Online videos I viewed from appliance part distributors on the internet show the part being accessed by removing only the rear panel; NOT TRUE. Be forewarned, the complete oven/range must be torn down to access the module at the core of the unit (on a Kitchen Aid made by Whirlpool).
XPOWER BR-2C01A 1/8-HP 120-CFM Indoor/Outdoor Inflatable Blower, 0.8-Amp
This tiny blower is the W10331686 ideal size to inflate your holiday decorations or ads. It’s lightweight and the 1/eighth HP motor uses a maximum of only. 8 amps which allows you to keep your inflatables on all day without spending a fortune on your electricity bill. It’s also UL/CUL safety certified.
Prime-Line Products U 9515 Door Hole Cover Plate, 2-5/8 inch Diameter, Finished in Gray Primer
This door hole cover plate is constructed of steel and it comes painted in a gray primer. It’s intended to preserve security on entry doors where handle latch and deadbolt hardware are not present. These hole covers are able to hide holes from 1/2 in. In diameter up to 2-1/8 in. On doors up to 2-1/8 in. Thick.
MINI Cooper NO HOLES License Plate Bracket (up to 2014 / R Models) – DOES NOT FIT New F55/ F56 Hatch/Hardtop, Countryman or Paceman Models)
This item is for the MINI Cooper (R50, R52, R53, R56, R57, R58, R59) and Clubman (R55) models and won’t work with the new F56 MINI, Countryman or Paceman as they use different tow hooks. The ‘NO HOLES’ License Plate Bracket (NHLPB) doesn’t need you to drill into your front bumper. Instead, it utilizes a custom machined stud that screws into the towhook receptacle. All parts are made from Stainless Steel to ensure no rust. The mounting hardware utilizes nylock nuts or lock washers which won’t loosen from vibration. The plate attachment screws are button head socket cap screws for a nice clean look. TERMS OF SALE Item will be shipped inside 1 working days (not as well as holidays) after payment acknowledgement. Import duties, taxes and charges aren’t included in the item price or shipping charges. These charges are the customer’s responsibility. Verify with your country’s customs office to find out what these extra costs will be previous to bidding/purchasing. If you get a faulty unit notify us now. Things carry a 1yr warranty and we’ll pay the cost for exchange. Returns won’t be accepted after 30 days from buy. Shipping charges aren’t refundable at any time. If you decide to return a non-faulty unit a 9. 95 re-stocking fee will apply. All returns will require notice of return with a tracking number.
Set of Four License Plate Screws (Black Zinc Plated) vs W-10331686
High quality black zinc plated license plate screws which are corrosion tolerant, lasting, and superb looking. They are 1/4-14X3/4 slotted hex washer head self tapping screws which are standard license plate screws for most domestic make vehicles. We suggest using care while installing to not scratch the finish.
Chrome Metal Sports Style Car License Plate Frame Universal Bolt Screws For JEEP
Fit：JEEP All Model Condition: 100 Brand new in Box and High quality Material: chromium-plated Metal as well as: 4 pcs in one set Size : logo: 20mm diameter,nut on the corner for the diameter size 25mm Two type bolts,you may be able to chose it base on the situation. Common Fit，Easy installtion,Fix by screw directly This is the cool license plate frame bolts which are made by chromium-plated metal can replace the original bad bolts/screws of the license plate frame and also show the beauty feature of your car. Package include: 4pcs License Plate Frame bolts.
Milescraft 1214 Door Hinge Mortising Kit
Increase security and privacy in your home by replacing interior and outside doors without damaging the jamb or door frame with the Entry and Interior Door Mortise Kits from Milescraft. Each kit features an easy to use drop-in template design. Tough steel frame changes from 1-3/8″ to 1-3/4″ doors and jambs. Focused tabs on each template ensure complete accuracy. Will include a lasting carbide tipped 1/2″ router bit with ball bearing eliminating the need for guide bushings. Will include easy measure guide to change standard business placement of your door hardware. Hinge Mortise Kit will include templates for 2-1/2″, 3″, 3-1/2″, 4″ and 4-1/2″ hinges.
Dynamat 19100 License Plate Kit
Have you ever heard a car coming down the road with the stereo playing, however the loudest part of the car is the rear license plate? Not a good thing. Vibrations passed to the license plate from the bass energy in the car because license plate rattle. You may be able to stop license plate rattle with the Dynamat Xtreme License Plate Kit. The kit will include a sheet of Dynamat Xtreme for the back of the license plate. Your installation is complete when you mount the Dynamat “I have Got Better Sound” License Plate Frame, with the four included neoprene strips.
eBoot Stainless Steel License Plate Frame Bolt Screws Fasteners with Zinc Safety Screw Caps
The eBoot license plate frames screws fasteners and caps plans: Screws fasteners material: steel Caps material: zinc Color: silver Product weight: 43 g lasting Rust-free Easy to install Package will include: 4 stainless steel screw 4 agreeing stainless steel nut 4 zinc anti theft license plate buckles 4 agreeing zinc screw cap cover.
FireCord 1000ft Olive Drab
FireCord 1000ft Olive Drab – Fire tinder added as the eighth inner strand to standard 550 nylon paracord. The eighth strand is color coded, waterproof, and is easy to ignite. When you need the fire tinder, remove the inner strands, light just like any fire tinder and build your fire. After the inner strands were used, the outer shell may be reused like before, for lanyards, keychains, zipper pulls, or emergency lashing. 1000 ft. Length.
Stanley National Hardware 2055BC 1-1/2" Strap Loop in Nickel
If for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is dedicated to maintaining the highest level of product quality, novelty and manufacturing technology. Latching and fastening alternatives for your indoor and outdoor uses. Rope and strap loops have a 95-pound safe working load and are sold in packs of 10. The bright clean Nickel finish will add to the modern look and feel of the product.
Antigravity Batteries XP-10 Battery Jump Starter & Charger – Back Up Power Supply – JUMPS A DIESEL TRUCK
This is Antigravity Batteries new and MOST POWERFUL micro jump starter and personal power supply. It has a capacity of 18,000 milliamps and up to 600 peak amps for big starting potential Nothing on the Market compares. • Weighs 18 ounces and fits in your back pocket. • Will jumpstart a diesel truck • Holds a charge for up to a year. • Charges a smart phone in 30-60 minutes (yes, the iPhone5). • 4 Power Ports: 19v for laptops. 12v standard output for all 12v accessories. (2) USB 5v for charging or powering ANY 5v USB device. • Comes in a convenient carrying case with all of the obliged adapters. • fitted High Powered LED light with pre set flash patterns as well as “S. O. S. ” • LED battery capacity display tells you how much life is left on your Micro-Start. • Automatically shuts off when not used to conserve power. • fitted over-charge and over-discharge protection to avoid harming your battery. Dimensions: Length = 9″ Width = 3. 2″ Height = 1. 2″ Weight = 18 Ounces Included in Carrying Case: • Micro-Start XP-10 Unit. • removable “SMART” mini jumper clamps with fitted over-charge and reverse polarity protections. • 1 Black common Cable with 8-different removable info to fit all the different brands of Laptop charging ports. (Apple except 16 volt laptops, Acer, Dell, HP, Asus, and more) • 1 Black common Cable for all 12v Accessories like Mobile DVD players, or another 12v Accessories. • 1 White common 4 into 1 USB Cable – Fit most 5v USB chargeable electronics like all Cell Phones, iPads, iReaders (Kindles), Go Pro Cameras, GPS, tablet computers, and anything else using the 5V USB standard (info included are Mini USB, Micro USB, Apple 8 pin, Apple 30 pin) • 1 Home Charger • 1 Mobile Charger for plugging into cigarette lighter socket Fitment: Laptops (not well-matched with Apple 16v Laptops) Cell Phones, iPads, GPS, PSP, Kindles, Bluetooth Devices and many more..
Motorcycle Machined Billet Aluminum Gas Tank Cap "FO-STAR" with STEEL Stepped Flanged "Tophat" Bung – Chopper Bobber Cafe Racer
Billet evidence Designs Machined Billet Aluminum FO-STAR Gas Tank Cap. All you have to do is weld it in and fill it up. Easily welds to any STEEL gas tank or oil bag. Knurled Cap – CNC Machined from 6061 Billet Aluminum. Non-Vented – Cap will must be drilled out if a vented cap is required. “Tophat” Bung – Machined from DOM Steel and stepped to make welding a breeze. Just drill a 1-1/2″ hole and drop it in. 1/8″ Buna-N O-Ring – Temperature range -35 to +250 F. Durometer hardness is A70. WE HAVE various STYLES TO decide FROM. MADE in the USA. Dimensions: Cap ONLY: OD= 1-5/8″ Height (as well as Threads)= 3/4″ Knurled Edge= 1/8″ Bung ONLY: OD= 1-5/8″ Height= 3/8 Thread Pitch= 1-1/4″-12 Finish: Machined “FO-STAR” Style Cap. Included: Billet Aluminum Cap. Buna-N Seal. Steel Bung. Fitment: Will fit in any tank that can accommodate the above dimensions.
- Whirlpool 9758079 Oven Igniter for Range
- W10331686 Spark Module for Whirlpool
- Whirlpool W10293048 Gas Valve
- Whirlpool Oven RangeSpark Module 9758080
- Whirlpool 12001596 Spark Module
Models to consider:
|D&R201409110013 LIAM60908||W10410999 GMG-0002S-AU1-70||W10006355 C 1001|
|79150-2PK SSS620||N245-217 U 9515||AG-XP-MS-3 LA-120|
|Y54414 C 1041||X-41ATR N5411||ECSBPK01 312-PF2-4-48|
|W10435302 AG-XP-10||AG-YTX12-24 GMG-0002S-MINI||BR-2C01A Y055980|
|B92233 W10380496||ez245 M 6145||ASG35CH FAST-2|
|W10381562 D&R20140911006||JHD0J24 W10006384||US-SS-304UKIT W10111905|
|TH 22253 AL_GAS_CAP_4STR||PF-C912|
|W10111905 AL_GAS_CAP_4STR||Y055980 AG-XP-10||SSS620 ECSBPK01|
|GMG-0002S-AU1-70 W10435302||ez245 X-41ATR||W10410999 B92233|
|LA-120 BR-2C01A||US-SS-304UKIT N5411||Y54414 FAST-2|
|W10006384 JHD0J24||ASG35CH 79150-2PK||W10006355 C 1041|
|TH 22253 312-PF2-4-48||W10381562 M 6145||AG-XP-MS-3 GMG-0002S-MINI|
|N245-217 PF-C912||D&R201409110013 LIAM60908||U 9515 AG-YTX12-24|
|W10380496 D&R20140911006||C 1001|
|N245-217 C 1041||C 1001 AL_GAS_CAP_4STR||US-SS-304UKIT W10006355|
|ECSBPK01 SSS620||FAST-2 AG-YTX12-24||LA-120 N5411|
|W10435302 X-41ATR||B92233 ez245||LIAM60908 GMG-0002S-AU1-70|
|Y54414 312-PF2-4-48||Y055980 TH 22253||D&R20140911006 AG-XP-10|
|JHD0J24 D&R201409110013||W10111905 ASG35CH||GMG-0002S-MINI W10381562|
|PF-C912 W10006384||M 6145 79150-2PK||BR-2C01A AG-XP-MS-3|
|W10410999 U 9515||W10380496|